GUIDE TO INSTALLATION AND OPERATION
24
| IPG-3901
URS Format
– use the radio buttons in the URS area to select whether the URS is OFF or ON.
URS
Description
Default
OFF
URS cannot be selected as the reference source, and is
ignored by the Auto detection mode
ON
ON
URS is available, and related to
the
Scan Rate
URS
59.94 Hz
29.97 Hz
50 Hz
25 Hz
5.7 Test panel
The test generator can be selected by the user to appear on any output (SDI and stream).
Test Pattern Generator Format
Select the test pattern format using the pulldown.
The pattern will be generated at the System-wide Scan Rate, as specified in the
Gateway Config/System
panel.
•
The current value is displayed in this panel at the top of the table, for reference
•
The generator will be synchronous to the REF IN if available; otherwise it will be free-run.
Select the
Test Pattern
checkbox beside a gateway to force the test pattern onto that output.
Select the
Force All
checkbox to force the test pattern onto all outputs.
Note: The test pattern is not applied to TICO encoders or decoders..
Format
SD, 720p, 1080i, 1080p
Figure 5-10 Test panel: (left) Aggregation mode with one TICO DEC; (right) Redundancy mode, TICO OFF
