GUIDE TO INSTALLATION AND OPERATION
IPG-3901 |
17
Test Address
Type a proposed destination address into the data box, and click
Ping
to check whether the destination can be seen
by this port.
5.3.2 Network Config panel – Status tab
This tab reports on the status of the ETH1 and ETH2 ports.
Status
Details
Link
The icon indicates the link status:
Green – up and valid
Grey - down
IP Address
As set in the Settings tab
Subnet Mask
As set in the Settings tab
Gateway
As set in the Settings tab
MAC Address Each port has a separate MAC address,
factory-set and non-configurable.
SFP
Presence
Green – supported SFP detected
Grey – no supported SFP detected
There are no operating controls or settings on this tab.
5.3.3 Network Config panel – Statistics tab
This tab displays continuously-updated statistics about the
data passing through each of the ethernet ports.
•
Packets: The total number of Ethernet packets
transmitted and received since the last reset on each
port.
•
Errors: The total number of Rx and Tx errors detected
on each ethernet port since the last reset.
The accumulated statistics can be reset for a fresh start by
clicking the
Reset ETH Statistics
button
Figure 5-6 Network panel – Statistics tab
Figure 5-5 Network panel – Status tab
