GUIDE TO INSTALLATION AND OPERATION
IPG-3901 |
11
Icon #5 – ETH1 Status
(green)
IP link up and active.
(red)
No link (port down).
Icon #6 – ETH2 Status
(green)
IP link up and active.
(red)
No link (port down).
(gray)
Ethernet port not used.
Icon #7 – Health Monitoring
(green)
Hardware OK.
(red)
Hardware Health Monitoring (Hardware fault detected).
If this icon appears flashing red, you need to call Technical Support
Icon #8 – Operation Mode
(green)
Operation mode: process – normal processing of the input signal.
(yellow)
Operation mode: Enabled, but no signal to process.
(yellow)
Operation mode: TEST – color bar and audio test tones enabled on at least one gateway.
Section 2.
The left portion of the window contains selection buttons for all of the individual panels, which become
highlighted when they are selected. The main window section (3) then displays the selected panel, all of which are
described in detail below.
Section 3.
The main section displays the panel selected in section 2. It may contain multiple tabs to access any
appropriate sub-panels.
Section 4.
The lower left corner of the window identifies the Preset currently in use or “Custom” if none is applicable.
