Belden 1RU32LCD-BK-K, User Manual

Page: 70 / 269

48
RollCall Templates
Setup Template
Tab. 5-6: Other Setup Template Items
Item Description
Protection Destination protection:
Device ID Text box.
Set the panel device ID.
This is used, for example, on an LCD
Protect button to
indicate which device is protecting a selected
destination.
Drop-down list Drop down list.
Select panel device mode:
• Non-master mode - panel cannot override another device’s
protect.
• Master mode - panel can override another panel’s protect.
For example,

a destination may have been protected from a soft
panel. A master mode panel can override this and
remove the protect.
Default settings Set panel configuration to the factory default
configuration.
Router controller IP configuration settings are not
altered when resetting the panel to the factory default
settings.
The current panel operating mode is unaffected by
pressing this button.
Factory Defaults Button.
Click to revert panel configuration to the factory
settings.
Matrix Enable Check boxes.
One check box per router matrix under control of the
router controller that the panel is connected to.
Select to enable routing in the matrix.
Re-connect to router controllers to make any change
take effect.
Router Dimensions
Router Sources Displays the number of router sources.
Router
Destinations Displays the number of router destinations.
POD XY Mode
Pod Mode Active Check box.
Select for RollPod mode (not covered in this user
manual).
In RollPod mode, the user can define individual button
functionality for devices that support the RollCall
protocol.