manualshive.com logo in svg

Belden 1RU32LCD-BK-K, User Manual, Page: 121 / 269

Share
Download
Belden 1RU32LCD-BK-K User Manual Download Page 121

99

G2 Series 1U Router Control Panel

User Manual

Other Panes and Controls

This section describes some other controls on the XY Mapping template.

Tab. 5-24: Other Items  

Item

Description

Goto Routed Source Page on Destination Select:

 

Enable

Check box.
Controls the source page shown on the source selection 
buttons after a destination has been selected:

• Select check box - source page displayed changes to show 

the page containing the currently routed source (routed to 
the selected destination).

• Deselect check box - source page displayed is unaffected.

User Interface Port Names

Selection boxes.
Define the names shown in the template:

Sources

Drop down box.
Select to view: 

•

Level Nam

es - the pure name router port name.

•

Association Names

 - the port association name.

Destinations

Drop down box.
Select to view: 

•

Level Nam

es - the pure name router port name.

•

Association Names

 - the port association name.

Summary of Contents for 1RU32LCD-BK-K














































































































































































































































































Reviews:

No comments