Belden 1RU32LCD-BK-K, User Manual, Page: 243 / 269

221
G2 Series 1U Router Control Panel
User Manual
For example, to select destination ‘
T01-02
’:
• Press group selection button ‘T’ .

The Selected Group button shows ‘T’.

The resulting list of possible destinations are shown on the Destination Selection
buttons.
• Press group selection button ‘T0’ .

(Letters on the buttons adapt to show the next possibilities.)

The Selected Group button shows ‘T0’.

A smaller list of possible destinations is shown.
• Press group selection button ‘T01’ .

The Selected Group button shows ‘T01’.
• Press group selection button ‘T010’ .

The Selected Group button shows ‘T010’.
• Press group selection button ‘T0102’ .

The Selected Group button shows ‘T0102’.
This has filtered the list of destinations and reduced the list of destinations.

In our example, enough characters of the signal name have been entered to select a
single destination (‘
T01-02
’).
If more than one possibility still remains, the resulting possible destination(s) are
shown on the
Destination Selection buttons.
Fig. 7-22: Destination Selection Buttons
4 Press the Destination Selection button to select the destination.

For example, press ‘
T01-02
’.
The destination has been selected.
To see which source is currently routed to the selected destination:
5 View the Routed Source button. It indicates the routed source.
Note: If there are more filtered list items than selection buttons,

then the filtered list may be navigated:

One Destination Selection button automatically converts to being a
‘Paging’ button.
• Use the button to navigate to pages of destinations.

(The button is labeled ‘DEST PAGE N : M’, where N is the page
number and M is the total number of pages.)
• The rotary control can be used to navigate through pages.
Rotate the button clockwise or counter-clockwise.
Destination Selection buttons