BELARUS-1021/1021.3
Operating manual
27
Integrated display KD 8083
The indicator operates as follows:
When the power is on, the indicator
switches to the main mode of operation.
When no signal arrive from the speed
sensors, the digital indicator (4) shows the
readout of the engine service hour counter,
and the LED goes on located next to the “h”
symbol.
When the tractor is moving, pulses from
the speed sensors arriving to the input of the
pulse indicator results in switching to the
speed indication mode. At that, the digital
indicator shows the changed design travel
speed, and the LED goes on located next to
the “km/h” symbol.
When no signal arrives from the right
wheel speed sensor for more than 12 seconds
after start of movement, the right side of the
digital display shows the symbol “ ”
indicating that the connection and operability
of the right wheel speed sensor needs to be
checked. When no signal arrives from the left
wheel speed sensor for more than 12 seconds
after start of movement, the right side of the
digital display shows the symbol “ ”
indicating that the connection and operability
of the left wheel speed sensor needs to be
checked. The digital display has no speed
readout at that. To restore the speed readout,
correct the above faults.
The tractor electric system high voltage
alarm goes on when the voltage exceeds 18.5
V. At that, the indicator KD 8083 goes off, as
the protection operates. When the voltage
drops to 16.5 V, the display returns to the
operation status, and the high voltage alarm
goes off.
Attention!
The manufacturer has
programmed the KD 8083 integrated display
exactly for your tractor model.
Reprogramming is required only when
changing the tire type. Do not reprogram the
KD 8083 integrated display unless necessary.
For the procedure of KD 8083 integrated
display programming, see Adjustments.
1 Engine speed indicator (pointer
indicator);
2 PTO speed indicator in 1,000 rpm mode
(light indicator);
3 PTO speed indicator in 540 rpm mode
(light indicator);
4. Digital five-digit display;
5 LEDs illuminated in the programming
mode of “K”, “R”, “Z” coefficients, and
the LED “T” illuminated in the mode of
indication of precise total service hours
of the engine (opposite to the respective
LED).
6 LEDs illuminated in the mode of
indication of speed “km/h” and total
service hours of the engine “h” (opposite
to the respective LED).
7 Electric system high voltage signal (red);
Integrated display KD 8083
Examples of information display by the
digital display in the operating mode
Total service hours
of the engine, hrs
Design travel speed,
km/h
