Beko WDIC7523002, User Manual

Page: 31 / 84

User’s Manual
31 / EN
Preparation
4.7.4 Pre-Wash Compartment
Put the powder pre-wash detergent or powder stain remover into the middle
compartment with number “I”.
You can also put liquid bleach into this compartment while the machine takes in water
during pre-wash or first rinsing step. Adding the liquid bleach while the machine
takes in water allows it to be diluted before it is poured onto the laundry.
You must select extra rinsing option if you use liquid bleach in a washing Programme.
Bleach must be removed from the laundry with rinsing; otherwise it may cause
itching on the skin.
C
INFORMATION
• Read the dosage instructions and label of your garments
carefully before using the liquid bleach.
4.7.5 Choosing the detergent
Detergent type to be used depends on the fabric type and colour.
• Use different detergents for coloured and white laundry.
• Wash your delicate clothes only with special detergents (liquid detergent, wool
shampoo, etc.) intended solely for delicate clothes.
• When washing dark coloured clothes and quilts, it is recommended to use liquid
detergent.
• Wash woollens with special detergent made specifically for woollens.
A
CAUTION
• Use only detergents manufactured specifically for
washing machines.
• Do not use Powdered Soap.
4.7.6 Adjusting the amount of detergent
The amount of washing detergent to be used depends on the amount of laundry, the
degree of soiling and water hardness.
• Do not use amounts exceeding the dosage quantities recommended on the
detergent package to avoid problems of excessive foam, poor rinsing, financial
savings and finally, environmental protection.
• Use lesser detergent for small amounts or lightly soiled clothes.
4.7.7 Using gel and tablet detergent
• If the gel detergent thickness is fluidal and your machine does not contain a
special liquid detergent cup, put the gel detergent into the main wash detergent
compartment during first water intake. If your machine contains a liquid detergent
container, fill the detergent into this container before starting the programme.