Beko WDIC7523002, User Manual

Page: 23 / 84

User’s Manual
23 / EN
Installation
a) Loosen the lock nuts on the feet by hand.
b) Adjust the feet until the product stands level and balanced.
c) Tighten all lock nuts again by hand.
3.7 Electrical connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company
shall not be liable for any damages that will arise when the product is used without
grounding in accordance with the local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than 16 Amps, have a
qualified electrician install a 16 Amp fuse.
• The voltage specified in the "Technical specifications" section must be equal to
your mains voltage.
B
DANGER!
Damaged power cables must be replaced by the
Authorised Service Agent.
Important
Fitting a different plug
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals on your plug, proceed as
follows:
1 Connect the green - yellow or green (earth) wire to the terminal in the plug marked
‘E’ or with the symbol f or coloured green and yellow or green.
2 Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured
black.
3 Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.
With the alternative plugs a 16A fuse must be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a qualified electrician.