Beko WDIC7523002 User Manual Download Page 83

Page: 83 / 84

Republic of Ireland: 01 862 3411 or

[email protected]

Register your appliance: For UK registrations visit beko.co.uk/register and for the Republic

of Ireland beko.ie/register.

Before requesting service please check the troubleshooting guide in the Operating Instructions

as a charge may be levied where no fault is found even though your product may still be under

guarantee.

Service once the manufacturers guarantee has expired

If you have purchased an extended guarantee please refer to the instructions contained within

the extended guarantee agreement document, otherwise please call the appropriate number

above where service can be obtained at a charge.

Should you experience any difficulty in obtaining service contact the Beko Customer Helpline

on Tel: 0333 207 9710 or e-mail:

[email protected]

……………………………………………………………………………………………………………

This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Herts,

WD18 8QU. Beko plc is registered in England and Wales with company registration number

02415578.

Summary of Contents for WDIC7523002





















































































Search results

Summary of Contents for WDIC7523002

Reviews:

Related manuals for WDIC7523002

Brands by name

Popular brands

Beko WDIC7523002, User Manual

Search results

Summary of Contents for WDIC7523002

Reviews:

Related manuals for WDIC7523002

Brands by name

Popular brands