Beko WDIC7523002 User Manual Download Page 8

Page: 8 / 84

8 / EN

Washer-Dryer

Important instructions for safety and environment

1.1.1 Electrical safety

DANGER!

If the product has a failure, it should not be operated

unless it is repaired by the Authorised Service

Agent. There is the risk of electric shock!

Never wash the product by spreading or pouring

water onto it! There is the risk of electric shock!

CAUTION

• If the power cable is damaged, it must be replaced by

the manufacturer, after sales service or a similarly

qualified person (preferably an electrician) or

someone designated by the importer in order to avoid

possible risks.

PRECAUTION

• Unplug the product when it is not in use.
• Never touch the plug with wet hands! Never unplug by

pulling on the cable, always unplug by holding the plug.

• Product should be unplugged during installation,

maintenance, cleaning and repair procedures.

• Do not make connections via extension cables or multi-

plugs.

INFORMATION

• This product is designed to resume operating in the event

of powering on after a power interruption. If you wish to

cancel the programme, see "Cancelling the programme"

section.

Summary of Contents for WDIC7523002





















































































Search results

Summary of Contents for WDIC7523002

Reviews:

Related manuals for WDIC7523002

Brands by name

Popular brands

Beko WDIC7523002, User Manual

Search results

Summary of Contents for WDIC7523002

Reviews:

Related manuals for WDIC7523002

Brands by name

Popular brands