Beko WDIC7523002 User Manual Download Page 11

Page: 11 / 84

User’s Manual

11 / EN

Important instructions for safety and environment

DANGER!

Do not touch loading door glass with bare hands

after drying. There is the risk of getting burnt.

In order to maintain laundry in a temperature that

will prevent them from getting damaged, a cooling

step is performed as a final step. You may be

exposed to hot steam if you open the door before

cooling is complete. There is the risk of scalding.

If the drying programmes are interrupted (as a result

of programme cancellation or power failure),

laundry in the machine can be hot. Be careful.

CAUTION

• Do not stop the machine before drying programme is

completed. If you have to stop the machine, remove

all laundry and lay them in a suitable place to let them

cool down.

• Your product is suitable to operate in ambient

temperatures between 0°C and +35°C.

• Ambient temperatures between 15°C and +25°C are

ideal temperatures for your product.

• Do not let pets enter the product. Check inside the

product before using.

• Do not overload the machine for drying. Observe the

maximum load levels specified for drying.

Summary of Contents for WDIC7523002





















































































Search results

Summary of Contents for WDIC7523002

Reviews:

Related manuals for WDIC7523002

Brands by name

Popular brands

Beko WDIC7523002, User Manual

Search results

Summary of Contents for WDIC7523002

Reviews:

Related manuals for WDIC7523002

Brands by name

Popular brands