Beko WDIC7523002 User Manual Download Page 19

Page: 19 / 84

User’s Manual

19 / EN

Installation

3.1 Appropriate installation location

• Place the product on a solid and level floor. Do not place it onto a carpet with high

pile or other similar surfaces.

• Do not place the product close to the edge if the floor contains steps. Do not also

place the product on a platform.

• Do not place the product on the power cable.
• Do not install the product in environments where the temperature falls below 0

ºC.(See. Warnings for Drying)

Operate the product in a well ventilated and dust free environment.

3.2 Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement. Remove the

packaging reinforcement attached to the ribbon.

DANGER!

Your product is heavy. Remove packaging

reinforcement as displayed in the figure.

Be careful not to get your hand caught under the

machine during this procedure.

Summary of Contents for WDIC7523002





















































































Search results

Summary of Contents for WDIC7523002

Reviews:

Related manuals for WDIC7523002

Brands by name

Popular brands

Beko WDIC7523002, User Manual

Search results

Summary of Contents for WDIC7523002

Reviews:

Related manuals for WDIC7523002

Brands by name

Popular brands