24 / EN
Washer-Dryer
Operating the product
• Drying
This function provides drying of laundry after washing. Check from the programme table in which programmes this auxiliary function is selectable.
5.12 Drying Steps
5.12.1 Iron Dry
Drying is carried on until dryness level reaches Iron Dry step.
5.12.2 Wardrobe dry
Drying is carried on until dryness level reaches Wardrobe Dry step.
5.12.3 Extra wardrobe dry
Drying is carried on until dryness level reaches Extra Wardrobe Dry step.
5.12.4 Delicate drying
Use this programme to dry 100% synthetic and synthetic blend sateen type underwear (nightwear, upper underwear, lower underwear, pajamas)
which are dryable as per washing instructions.
C
NOTE
¾
Dryness level may change due to the blend, weave/knit type, amount and dampness level of the laundry.
¾
Products that contain accessories such as lace, tulle, stone, bead, spangle, wire and products with high content of silk
should not be dried in the machine.
¾
Silk blend clothes containing cotton or have a sateen appearance may remain damp when dried in this programme.
5.12.5 Time-based drying
You may select either of 10
´
, 20
´
, 30
´
, 60
´
, 90
´
, 120
´
and 150
´
drying times to reach the final drying degree at low temperature.
C
NOTE
¾
For drying laundry up to two pieces, you should prefer timed drying steps in the cotton or synthetic drying programmes to
be selected according to the type of the laundry.
¾
When you select 10´ drying function, only Aeration and Cooling is performed.
¾
If the laundry is not dry as required after the drying programmes, you should prefer timed drying steps in the cotton or
synthetic drying programmes to be selected according to the type of the laundry.
¾
When this function is selected, machine performs drying up to the set time independent of the drying degree.
5.13 Time display
Remaining time for the completion of the programme while it is running is displayed as “01:30” in hours and minutes format.
C
NOTE
¾
Programme time may differ from the values in the "Programme and consumption table" depending on the water
pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions
selected and the changes at the mains voltage.
5.14 End Time
60
o
C
1200
18:55
FINISH TIME SETTING
60
o
C
1200
18:55
FINISH TIME ON
With the
End Time
function, the startup of the programme may be delayed up to 24 hours. After pressing
End Time
button, the displayed time
is the programme's estimated end time. If the
End Time
is adjusted,
End Time
indicator is illuminated.
“End Time Setting”
appears on the
display. Meantime,
Start / Pause
button flashes.
In order for the End Time function is activated and the programme is completed at the end of the specified time, you must press
Start / Pause
button after adjusting the time.
“Finish Time On”
appears on the display when you press the button.
Start / Pause
button stops flashing
and remains illuminated continuously.
If you want to cancel End Time function, press
End Time
button until the End Time indicator turns off or press
On / Off
button to turn off and
on the machine.
1. Open the loading door, place the laundry and put detergent, etc.
2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3. Set the end time of your choice by pressing the
End Time
button.
End Time
indicator illuminates.
4. Press
Start / Pause
button. Time countdown starts. “:” sign in the middle of the end time on the display starts flashing.
