26 / EN
Washer-Dryer
Operating the product
C
NOTE
¾
The loading door will not open if the water temperature in the machine is high or the water level is above the door opening.
5.18 Child Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.
C
NOTE
¾
You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the
machine again, programme will resume from where it has stopped.
¾
If you press any button when the Child Lock is activated, the machine will give an audible warning. Audible warning will
be cancelled when the buttons are pressed 5 times in a row. The warning phrase on the screen goes on to be displayed.
5.18.1 To activate the Child Lock:
60
o
C
1200
05:25
CHILD LOCK ENABLED
Press and hold 2nd and 4th Auxiliary Function
buttons for 3 seconds. After the countdown as "Child Lock 3-2-1" on the display is
over, "Child Lock Enabled" appears on the display. You can release
2
nd
and 4
th
Auxiliary Function
buttons when this warning is displayed.
C
NOTE
¾
"Child Lock Enabled" appears on the display if you press any button when Child Lock is enabled.
5.18.2 To deactivate the Child Lock:
60
o
C
1200
05:25
CHILD LOCK DISABLED
Press and hold 2
nd
and 4
th
Auxiliary Function
buttons for 3 seconds. After the countdown as "Child Lock 3-2-1" on the display is over,
"Child Lock Disabled" appears on the display.
5.19 Cancelling the programme
60
o
C
1200
05:25
CANCEL
The programme is cancelled when the machine is turned off and on again. Press and hold
On / Off
button for 3 seconds. After the countdown
as "Cancel 3-2-1" on the display is over, the machine turns off.
C
NOTE
¾
If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You should cancel the
Child Lock first. Countdown as "Pause 3-2-1" appears on the display.
¾
If you have to open the loading door after you have cancelled the programme, but it is not possible to open the loading
door since the water level in the machine is above the loading door level, then turn the Programme Selection knob to
Pump+Spin programme and discharge the water in the machine.
5.20 End of programme
“Laundry can be taken out” appears on the display when the programme is completed.
If you do not press any button for 2 minutes, the machine will switch to pause mode. Display and all indicators are turned off. Only the frame of
the
Programme Selection
knob remains flashing.
If you press any button or turn the
Programme Selection
knob when the machine is in pause mode, programme steps that are completed
will appear on the display.
5. 21 Entering the Settings menu
You can perform the following operations in Settings menu:
• Changing the language selection,
