BLG15 C7S SERVICE MANUAL
Sensitivity: Public
3.9
HomeWhiz Feature and Remote Control Function
HomeWhiz allows you to use your smart device to check your washing machine and
get information about its status. With HomeWhiz application you can use your smart
device to perform various procedures that can also be performed on the machine.
Plus, you can use some features only with the HomeWhiz function.
You must download the HomeWhiz application from the app store of your smart
device to use the bluetooth feature of your machine.
Make sure that your smart device is connected to internet to install the app.
If you are using the app for the first time, please follow the on-screen instructions to
complete your user account registration. Once the registration procedure is complete,
you can use all products with the HomeWhiz feature in your house on this account.
You can touch "Add/Remove Appliance" HomeWhiz application to see the products
paired with your account. You can perform user pairing procedures of these products
on this page.
To use the HomeWhiz function, the app must be installed on your smart
device and your washing machine must be paired to your smart device via
bluetooth. If your washing machine is not paired to your smart device it works
as an appliance which does not have a HomeWhiz feature.
Your product will operate as paired to your smart device via bluetooth. The
controls made by means of the application will be enabled through this
pairing; therefore the bluetooth signal strength between the appliance and
the smart device must be adequate.
Please visit www.homewhiz.com to see the Android and iOS versions
supported by the HomeWhiz application.
WARNING:
All the safety measures described in
"GENERAL SAFETY
INSTRUCTIONS"
section of your user manual apply to the remote operation
through HomeWhiz function as well.
3.9.1 HomeWhiz Setup
In order for the application to run, a connection between your appliance and the
HomeWhiz Application must be established. For this connection to be established
you must follow the steps below for setup procedure on both the appliance and the
HomeWhiz Application.
• If you are adding an appliance for the first time, tap „Add/Remove Appliance“ button
on the HomeWhiz Application. After this step tap „Tap here to setup a new
appliance“. Follow steps below as well as steps in the Homewhiz Application to
perform the setup.
• To start the setup, make sure that your machine is turned off. Press and hold the
Temperature button and the Remote Control Function button simultaneously for 3
seconds to switch your machine to HomeWhiz setup mode.
• When the appliance is in HomeWhiz setup mode, you will see an animation on the
display and the bluetooth icon will flash until your machine gets paired with smart
Summary of Contents for Arcelik BLG15 C7S
Page 10: ...BLG15 C7S SERVICE MANUAL Sensitivity Public ...
Page 11: ...BLG15 C7S SERVICE MANUAL Sensitivity Public Picture 3 12 Cover unlocking arm ...
Page 48: ...BLG15 C7S SERVICE MANUAL Sensitivity Public Picture 6 56 Picture 6 57 Picture 6 58 ...
Page 53: ...BLG15 C7S SERVICE MANUAL Sensitivity Public Picture 6 67 Picture 6 68 Picture 6 69 ...
