Beko Arcelik BLG15 C7S, Service Manual

Page: 14 / 72

BLG15 C7S SERVICE MANUAL
Sensitivity: Public
3.9.2 Setting up a washing machine that is connected to someone else's
account
If the washing machine you want to use was previously introduced to the system
with someone else‘s account, you must establish a new connection between your
HomeWhiz Application and the appliance.
• Download HomeWhiz Application on the new smart device you want to use.
• Create a new account and log in to this account on the HomeWhiz app.
• Follow the steps described in HomeWhiz Setup (4.3.15.1 HomeWhiz Setup) and
proceed with the setup procedure.
Since the HomeWhiz Feature and Remote Control function on your
appliance is operated via pairing using Bluetooth technology only one
Homewhiz application can operate it at a time.
WARNING: There is a limit to the smart devices that can be paired with
the appliance. If this limit is exceeded, the first paired device will be
deleted from the list of paired devices on the appliance and you will have
to repeat the setup procedure on that particular smart device.
3.9.3 Remote Control function and its use
After HomeWhiz setup, bluetooth will automatically turn on. To activate or deactivate
the bluetooth connection, please see 4.3.8.2 Bluetooth 3’’’.
If you turn off and on your machine while bluetooth is active, it will automatically
reconnect. In cases such as paired device going off the range, bluetooth will
automatically turn off. For this reason, you will need to turn on the bluetooth again if
you want to use the Remote Control function.
You can check the bluetooth symbol on the display to track your connection status. If
the symbol is continuously on, you have bluetooth connection. If the symbol is
flashing, the product is trying to connect. If the symbol is off, you have no connection.
WARNING: When the bluetooth connection is on in your product,
Remote Control function will be selectable.
If the Remote Control function cannot be selected, check the
connection status. If the connection cannot be established, repeat the
initial set-up settings on the appliance.
WARNING:
For safety reasons, the product’s door will remain locked
while the Remote Control function is enabled, independently of the
operating mode. If you want to open the door of the product, you will
need to turn the program selection knob or press the remote control
key to deactivate the remote control function.
When you want to control your washing machine remotely, you need to activate the
Remote Control function by pressing the Remote Control button while the programme
knob is in the Download Program/Remote Control position button on the control
panel of your washing machine. When your product is accessed, you will see a
screen similar to the below.