BLG15 C7S SERVICE MANUAL
Sensitivity: Public
NOTE: If you turn the knob to Off position, the machine will switch to "OFF" mode.
Step 17: Pump check
Description:
The motor which runs at 52rpm in the previous step will be stopped.
Pump is operated.
Warnings to be displayed on the 7S:
Refer to the knob position and information table.
Condition to pass to the next step:
You can pass to the next step two only in one way:
1) If the water level in the machine decreases to "Psafety - 15.0Hz" level, the next
step is started automatically.
Unless the water level reaches to "Psafety - 15.0Hz"
check of "Jet Pump" will not started even if "Start/Standby" button is pressed.
2) If "Start/Pause" button is pressed.
Timeout: If "Start/Pause" button is not pressed within 2*3 = 6 minutes, it goes into
"OFF" mode.
Switching to next step:
1) Step is changed automatically with the level check.
Unless the water level reaches "Psafety - 15.0Hz",
check of the "Jet Pump" will not started even if the "Start/Pause" button is pressed.
2) If "Start/Pause" button is pressed.
NOTE: If you turn the knob to Off position, the machine will switch to "OFF" mode.
Step 18: Display of the Errors occurred in the Service Mode
Description:
All components are off.
Condition to pass to the next step:
If the Bluetooth connection has been established as defined, this step will be passed
automatically.
If there has been a problem in the Bluetooth connection, the machine will not
proceed to the Pump step. Error code will be written
Position to turn the knob to
8,9,10,11,12
Summary of Contents for Arcelik BLG15 C7S
Page 10: ...BLG15 C7S SERVICE MANUAL Sensitivity Public ...
Page 11: ...BLG15 C7S SERVICE MANUAL Sensitivity Public Picture 3 12 Cover unlocking arm ...
Page 48: ...BLG15 C7S SERVICE MANUAL Sensitivity Public Picture 6 56 Picture 6 57 Picture 6 58 ...
Page 53: ...BLG15 C7S SERVICE MANUAL Sensitivity Public Picture 6 67 Picture 6 68 Picture 6 69 ...