Page
13 ©
BEKA 2019 All rights reserved!
...a product of
8.
Transport and storage
Use suitable lifting devices for transport.
Do not
throw
the device or expose it to
shocks
.
Secure the device against toppling down or slipping during transport.
8.1 Pump
If the device is lifted at the pump bracket, the maximum load
of 100 kg must be observed. The device must always be
lifted without barrel or container.
8.2
Beka Stream H barrel version
The pump, the barrel cover and the follower plate must always be transported in a disassembled state (separately).
8.3
Beka Stream H container version
The device must be lifted at the transport eyelets (fig. 9, red arrows). In addition, it
must be fixed to the pump bracket so that it cannot tip over.
The device must only be transported when it is completely empty.
Observe all valid safety and accident prevention regulations for the transport. Wear suitable
protective equipment
if
necessary.
Keep adequate distance to suspended loads
. The transport help or the elevating device must have the
adequate carrying capacity
.
When storing the device pay attention that the storage area is cool and dry in order to avoid corrosion of the
individual parts of the device.
Observe the storability of the contained lubricant for devices which are filled with lubricant. Exchange the
lubricant when it is over-stored (separation of oil and soap).
Notice!
Caution!
Figure 8
Figure 9
