2
1.
Description
2.
Operation
2.1 Controls
3.
Applications
3.1 Transmitter loops
3.2 Remote indication
4.
Installation
4.1 Location
4.2 Installation procedure
4.3 EMC
5.
Configuration and Calibration
5.1 Summary of configuration
functions.
5.2 Indicator function
5.3 Resolution
5.4 Position of decimal point
5.5 Calibration using an external
current source.
5.6 Calibration using internal
reference.
5.7 Bargraph format and calibration
5.8 Function of the
P
push-button
5.9 Tare function
5.10 Security code
5.11 Reset to factory defaults
5.12 Under and over-range
6.
Lineariser
6.1 Lineariser calibration using an external
current source.
6.2 Lineariser calibration using internal
reference.
6.3 Lineariser error message
6.4 Under and over-range
6.5 Lineariser default configuration
7. Maintenance
7.1 Fault finding during commissioning
7.2 Fault finding after commissioning
7.3 Servicing
7.4 Routine maintenance
7.5 Guarantee
7.6 Customer comments
8. Accessories
8.1 External keypad
8.2 Units of measurement and instrument
identification.
8.3 Alarms
8.3.1 Solid state output
8.3.2 Configuration and adjustment.
8.3.3 Alarm enable
8.3.4 Setpoint adjustment
8.3.5 Alarm function
8.3.6 Alarm output status
8.3.7 Hysteresis
8.3.8 Alarm delay
8.3.9 Alarm silence time
8.3.10 Flash display when alarm
occurs.
8.3.11 Access setpoint in display
mode.
8.3.12 Adjusting alarm setpoint from
the display mode.
8.3.13 Displaying setpoints on
BA524E bargraph.
8.4 Display backlight
8.4.1
Loop powering the backlight
8.4.2
Separately powering the
backlight.
8.5 Pipe mounting kits
The BA504E & BA524E are CE marked to show compliance with the European EMC Directive 2004/108/EC
CONTENTS
