BEKA BA377E-SS, Manual

Page: 24 / 65

24
6.5.2 Summary of Timer configuration
functions
This section summarises all the Timer configuration
functions. When read in conjunction with Fig 17 it
provides a quick aid for configuring the Timer. If
more detail is required, each section of this summary
contains a reference to a full description of the
function.
Display Summary of function
FunCtion
Instrument function
Defines the function of the instrument.
May be set to:
ELAP5E
Timer configuration
CloC
Clock configuration
All the entries in this Timer summary
assume that the BA377E-SS is
configured as a Timer by selecting
ELAP5E
.
See section 6.5.3
inPut
Configuration of Input
Contains a sub-menu with two sub-
functions:
inP . tYPE
Selects input sensor type
dEbounCE
Defines input debounce
inP . tYPE
Configures the Timer sensor input to
accept one of six types of input:
oP.CoL
Open collector ●
VoLt5 L
Voltage <1 >3V
VoLt5 H
Voltage <3 >10V
Pr.dEt
Proximity detector ●
ContACt
Switch contact ●
● Energise input by linking terminals
3 & 4.
See section 6.5.5
dEbounCE
Defines the level of debounce applied
to the input to prevent false functioning:
dEFAuLt
HEAVY
LiGHt
See section 6.5.6
Display Summary of function
di5P-2
Lower display
Configures the lower display to show
set time
5Et t
or, when the
CYCLE5
repeat function is activated, the restart
delay count-down plus the cycle count
number.
With
CYCLE5
not enabled:
Select Lower display shows
5td
Set time
5et t
oFF
Disables lower display.
See section 6.5.7
With
CYCLE5
enabled:
Select Lower display shows
5td
Cycles requested and
cycles performed with
time-down shown during
requested delay period.
Brief notification of timer
status i.e.
CYCLE
or
dELAY
at start of each
period.
LAbEL
Exactly as
5td
but with
periodic notification of
timer status i.e.
CYCLE
or
dELAY
.
oFF
Disables lower display.
See section 6.5.7
5tAr5toP
Starting and stopping the timer
Defines how the Timer is started and
stopped.
Start Stop
LoCAL &
button
*
button
ControL 1
Input high Input low
ControL 2
Input low Input high
High and low inputs are specified for a
continuous voltage input. For other
types of sensor input.
See section 6.5.8