BEKA BA377E-SS, Manual

Page: 26 / 65

26
Display Summary of function
oP1
Control output 1 (Optional)
Contains sub-menu with four sub-
functions,
EnbL
,
oP1 on
,
oP1 oFF
and
oP1 dELA
.
See section 6.5.21
Control output enable
EnbL
Enables or disables control output 1
without changing the parameters.
See section 6.5.22
Control output 1 on at
oP1 on
Defines when the control output turns
on (closes).
See section 6.5.23
Control output 1 off at
oP1 oFF
Defines when the control output turns
off (opens).
See section 6.5.24
Control output 1 delay
oP1 dELA
Introduces a configurable delay
between the
oP1 on
condition occurring
and the control output turning on
(closing).
See section 6.5.25
oP2
Control output 2 (Optional)
Functions as control output 1.
See section 6.5.26
CLr Gtot
Resets grand total to zero
This function resets the grand total,
which represents the total Timer run-
time, from within the configuration
menu when
CLr YE5
is selected and
5urE
is entered to confirm the
instruction.
Note: Once reset, the grand total can
not be recovered.
See section 6.5.27
CodE
Security code
Defines a four digit alphanumeric code
that must be entered to gain access to
the instrument's configuration menu.
Default code
0000
disables the security
function and allows unrestricted access
to all configuration functions when the
(
and
)
buttons are operated
simultaneously in the display mode.
See section 6.5.28
Display Summary of function
r5Et dEF
Reset to factory defaults
Resets the BA377E-SS to the factory
default configuration shown in section
6.5 when
YE5
is selected and
confirmed by entering
5urE
.
See section 6.5.29