![background image](http://html.mh-extra.com/html/beissbarth/servomat-ms-50/servomat-ms-50_instruction-manual_2723790020.webp)
ITALIANO
ENGLISH
SERVOMAT MS 50-52-63-65
20
COD. 102813 Rev.3
ISTRUZIONI PER L’USO
OPERAZIONI PRELIMINARI
»
Sgonfiare completamente il pneumatico;
»
Togliere i pesi di equilibratura della ruota per eliminare qualsiasi rischio
derivante dalla presenza dei pesi stessi.
STALLONAMENTO (Fig.24)
»
Mettere la ruota a terra, vicino allo stallonatore; avvicinare la paletta (E)
al tallone e premere il pedale comando stallonatore (B). L’operazione va
eseguita in vari punti della ruota finchè il tallone non sia completamente
staccato.
»
Ripetere l’operazione sul lato opposto della ruota.
Durante l’azionamento del braccio stallonatore, prestare
attenzione a non comprimere gli arti fra la gomma e lo stallonatore
stesso !
SMONTAGGIO (fig.25)
»
Girare in senso antiorario la manopola di bloccaggio (L) per sbloccare il
braccio.
»
Premere il pedale (D) per alzare il palo.
»
Premere il pedale apertura (C) per predisporre le griffe (O) per il bloccaggio
esterno del cerchio (
in caso di bloccaggio interno questa operazione non
va eseguita
).
»
Mettere la ruota sull’autocentrante esercitando una lieve pressione sul
cerchio; premere (e rilasciare subito) il pedale chiusura (C) per bloccarla.
»
Lubrificare il tallone con grasso utilizzando l’apposito pennello in dotazione
(ved.scatola degli accessori)
»
Premere (e rilasciare subito) il pedale (D) per abbassare il palo;
»
Portare la torretta (I) vicino al cerchio e far toccare il rullino (N) e la
superficie al bordo; girando la manopola (L) in senso orario si ottiene il
distanziamento orizzontale e verticale automatico dal cerchio ed il
bloccaggio del braccio
»
Con l’apposita leva alzare il tallone (fig.26) ed appoggiarlo sulla linguetta
della torretta (I);
»
Far ruotare l’autocentrante premendo il pedale (A) fino alla completa uscita
del tallone dal cerchio.
Operare con cautela, evitando di inserire le dita tra gomma e
cerchione durante le fasi di rotazione dell’autocentrante.
»
Alzare il palo premendo sul pedale (D) ed estrarre la camera d’aria.
»
Ripetere le medesime operazioni per la fuoriuscita del secondo tallone.
INSTRUCTIONS FOR USE
PRELIMINARY OPERATIONS
»
Completely deflate the tyre;
»
Remove wheel balancing weights to eliminate any danger arising from
their presence.
BEAD-BREAKING (fig. 24)
»
Place the wheel on the ground near the bead-breaker. Move the plate (E)
towards the bead and press the bead-breaking control pedal (B). This
operation is conducted at various points of the wheel until the bead is
completely detached.
»
Repeat the operation on the opposite side of the wheel.
When using the bead-breaking arm take care not to trap limbs
between the tyre and the bead-breaker !
DEMOUNTING (fig.25)
»
Turn the locking grip (L) anti-clockwise to unlock the arm.
»
Press pedal (D) to raise the column.
»
Press the “open” pedal (C) to prepare the jaws (O) for the external lock-
ing of the rim
(for internal locking this operation is not carried out).
»
Put the wheel on the chuck pressing down lightly on the rim; press (and
immediately release) pedal (C) to lock it.
»
Lubricate the bead with lubricant using the brush supplied (see accesso-
ries box).
»
Press (and immediately release) pedal (D) to lower the column;
»
Move the head (I) near to the rim so that the roller (N) touches the sur-
face of the flange. Move the locking grip (L) clockwise to achieve the
automatic horizontal and vertical distancing from the rim, as well as lock-
ing the arm
»
Raise the bead with the special lever (fig. 26) and place it on the head
tongue (I).
»
Rotate the chuck by pressing the pedal (A) until the bead comes com-
pletely out of the rim.
Take care not to insert fingers between tyre and rim while the
chuck is rotating.
»
Raise the column by pressing pedal (D) and remove the inner-tube.
»
Repeat the operation to remove the second bead.
24
25
26
Summary of Contents for Servomat MS 50
