Page 9
With in detection system:
"Carbon monoxide gas or Oxygen gas"
you can choose: a) enable - b) disable
of the General alarm memorization.
Selecting the Lacthing function, the unit will keep the relay
closed, until the Reset button is pressed.
Selecting the No-Latching function, the control unit will not
keep the relay closed when the alarm stops
Each time you press "ENTER" button you change ON/ OFF.
ONCE
CHOSEN
,
MOVE
WITH
THE
UP
AND
DOWN
BUTTONS
TO
THE
NEXT
SELECTION
.
Depending on the type of system you can choose the alarm
relay working mode; Continuous and Impulse.
In the "Continuous" position, the relay remains closed
until the RESET button is pressed.
In "Pulse" position, the relay remains closed for only 20
se conds
Each time you press "ENT ER" changes the written
continuous-impulse. Once selected, move with the buttons
UP and DOWN on the next selection.
ONCE
CHOSEN
,
MOVE
WITH
THE
UP
AND
DOWN
BUTTONS
TO
THE
NEXT
SELECTION
.
Depending on the type of the system it is possible to choose
the need to select the Positive Safety.
Selectio n
Use the UP and DOWN buttons to select Positive Safety.
Each time you press "ENTER" button changes the written
ON - OFF.
"ON" enables the Positive Security function
"OFF" disables the Positive Safety function
Once chosen, move with the UP and DOWN buttons on the
next selection.
N.B. This function is activated only after leaving the program.
ONCE
CHOSEN
,
MOVE
WITH
THE
UP
AND
DOWN
BUTTONS
TO
THE
NEXT
SELECTION
.
SELEZIONE
DELLA
SICUREZZA
POSITIVA
Down
UP
Left
Right
ENTER
General Functions
Selecting General Alarm Relay Operation Mode
Relay: Contin.
impulse
Positive safety: off
ON
latching:
ON
Relay: Continuous
impulse
Posit. safety: off
ON
latching:
off
ON
Selecting the General Alarm Latching
Relay: Continuous
impulse
Positive safety: off
ON
latching:
off
ON
Relay: Continuous
impulse
Positive safety: off
ON
latching:
off
ON
Continue on the second page
By positioning on the indicated arrow and pressing "ENTER"
to continue to the next page
