In maintenance 20 m
Methane 10:10
sensor 32 Exp.
020%
100%
00,0% LEL
Page 12
Beinat always attentive to the needs of its customers, has introduced into this unit the new function::
“MAINTENANCE”
This mode is used to ensure that the technician during normal maintenance does not interrupt gas delivery and
the interruption of the external siren.
The interruption period is managed directly by the technician acting on “M
AINTENANCE
:00”.
Each time you press the "ENTER" button changes the time range from 15 - 30 - 45- max to 60 minutes
N.B. at the end of the CountDown the equipment returns to the normal operating state
END: To exit the program, select "Return arrow".
"SELF-DIAGNOSIS".
The self-diagnosis consists in carrying out a check up of
operation of the entire system in case of anomalies, and
if necessary resort to repair.
Examples of reading:
E01-CE00 (central side communication error)
E01-SE15 (sensor 15 communication error)
E01-EE31 (expansion communication error 31)
END: To exit the program, select "Return arrow".
During the Maintenance period, the writing In Maintenance 20m appears on the first page (screen)
(20m = countdown time)
Maintenance interruption
If the work ends before the time set by pressing the RESET button, the maintenance cycle is exited.
Down
UP
Left
Right
ENTER
Advanced Functions
Maintenance: 00
factory reset
Indicator to return to the previous page, use "UP" and "DOWN"
keys and press "ENTER"
Indicator to advance to the
ALARM
THRESHOLD
SELECTION
page, use
"UP" and "DOWN" keys and press "ENTER"
Indicator to exit the program, use "UP" and "DOWN" keys and
press "ENTER"
