7
Installation and Set-up
When setting up the FeNObreath™, please ensure the package contains all the parts as detailed in
the ‘Parts and Accessories’ section of this manual. Please keep the screwdriver supplied for future
servicing requirements. The FeNObreath™ should be charged for 4 hours prior to first use.
Remove
the plastic film from the display and follow the next steps on how to charge the FeNObreath™
below.
NOTE:
The FeNObreath™ should not be operated in an environment outside of the temperature or
humidity ranges stated in the technical specification.
The default PIN is 0000. It is strongly recommended to change this prior to first use – please refer to
the ‘Change PIN’ section of this manual for instructions.
How to charge the FeNObreath™
The FeNObreath™ FeNO monitor comes with a Dock and charging cable to keep the monitor at hand
and fully charged.
To charge the FeNObreath™, first make sure
the micro USB cable provided is connected to
the docking station.
Connect the other end of the micro USB cable
to the pre-approved power adapter supplied,
using the appropriate universal adapter.
