Becom Argos3D-P33 Series Software User Manual Download Page 56

Page: 56 / 58

Software User Manual - Argos3D - P33x

Last change: 29 June 2020/Version 10

Support

8.1

General Support

General support for products can be found at BECOM Systems´ support site

Support Link



support.systems.becom-group.com

8.2

Software Downloads

Camera support packages are available for registered customers only. Please contact BECOM Systems support if
you do not yet have an account.

Software Download Portal



support.systems.becom-group.com

8.3

Camera Development Package

The camera offers the possibility to bring your own application onto the Argos3D - P33x.

The Argos3D - P33x is based on an embedded ARM Linux system based on the i.MX6 Quad-core processor from
Freescale Inc.

Please contact BECOM Systems support for more information.

Summary of Contents for Argos3D-P33 Series



























































Search results

Summary of Contents for Argos3D-P33 Series

Reviews:

Related manuals for Argos3D-P33 Series

Brands by name

Popular brands

Becom Argos3D-P33 Series, Software User Manual

Search results

Summary of Contents for Argos3D-P33 Series

Reviews:

Related manuals for Argos3D-P33 Series

Brands by name

Popular brands