3-20
Operation
Action
Result
1. Install the rotor.
2. Set up sample and buffer
reservoirs and tubing lines
as described in the rotor
manual. Route tubing lines
through the elutriator port
holes at the left side of the
door seal.
Close the centrifuge door.
3. Press [
ROTOR
]. Press the JE
soft key.
JE-6B appears in the
Rotor:
field.
4. Enter the remaining run
parameters.
5. Press [
ENTER
], then [
START
].
The rotor accelerates to set speed.
6. When the rotor reaches set
speed, turn on the strobe
controls by pressing the
strobe control power switch.
The power switch indicator lights.
Rotor : JE-6B
Speed : 0 RPM = 0 x G
Time : 00:00
Temp : 25°C Max Temp : 29°C
JA
JS
JLA
JV
JE
JCF-Z
Accel : MAX Decel :
SPEED
TIME
TEMP
A/D
OPT
ROTOR
Strobe
Power
Switch
ELUTRIATOR
DELAY
