3-3
Operation
PROGRAMMED RUN
PREPARATION
Prepare the rotor for centrifugation as described in the rotor manual.
INSTALLING THE ROTOR
The power must be turned on before you can unlock and open the
chamber door.
Action
Result
1. Turn the power switch on (
I
).
Indicator lights on the control panel light up.
2. Depress the foot pedal to
open the door.
The door opens.
1
Press the POWER switch to on (I).
2
Depress the foot pedal to open the chamber door.
3
Install the rotor according to instructions in the applicable rotor manual, then firmly
close the chamber door.
4
Press
[
OPT
]
, then use the keypad to enter the program number.
5
Check that all parameters are correct and that the door is closed. Press
[
ENTER
]
, then
press
[
START
]
.
6
Wait for program step 1 or 2 to end, or end the run by pressing
[
STOP
]
.
7
When the rotor stops, depress the foot pedal to open the chamber door.
