Beckhoff CX1100-09 Series, Hardware Documentation

Page: 26 / 40

Commissioning
5.4 Register settings CX1100-09xx
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
0x0D101
0 IN-
Register State_3 State_2 State_1 State_0 reserved reserved 24V_IN_
OK
24V_OU
T_OK
+1 charge
state C7 C6 C5 C4 C3 C2 C1 C0
+2 OUT-
Register IRQ3 IRQ2 IRQ1 IRQ0 AUTO_R
ES DIP_DIS reserved Output
OFF
+3 DIP-
DATA D7 D6 D5 D4 D3 D2 D1 D0
+4 identifier
0 "C" (ASCII)
+5 identifier
1 "X" (ASCII)
+6 identifier
2 "11" (DEC)
+7 identifier
3 "90" (DEC)
base address 0D1010
C = charge state 0% = 00h, 100% = FFh
IRQ = binary coded IRQ number; 0000 = disabled
DIP_DIS = 1 : disable DIP switch with DIP-DATA
AUTO_RES = 1 : auto reboot (shutdown after short power failure)
Attention
The AUTO_RES bit must be reset before system shutdown to "0" !
Meaning of STATE-Nibble:
Value State
0 no function
1 charging
2 full charged
3 discharged
4 discharging and restart
5 output off
6 overload
7 not used
8 not used
9 not used
CX1100-09xx 26 Version: 1.4