Installation
Becker Avionics
REU6100 Functions
70
REU6100
DV64460.03 Issue 11 January 2019
2.10 REU6100 Functions
Headset
The REU6100 can operate up to six headsets with dynamic or standard microphones.
•
The sensitivity of the microphone input and the level of the phone output can be
configured.
PTT Key
The standard input for the PTT activation is the ACU610X (user interface).
•
The REU6100 receives the PTT command via CANbus and can control eight transmitters.
•
By the configuration setup all users can be configured for high or low PTT priority.
•
If some users have the same priority level, the priority is given to the user who first push
the Transmit-PTT (TX-PTT).
o
Transmit-PTT has always priority over Intercom-PTT (IC-PTT).
•
The permission to use Transmit-PTT can be individual configured for all ACU610X. Only
back-up mode PTT of the pilot and copilot are directly connected to the REU6100.
2.10.2.1 PTT Stuck Detection
The REU6100 has a stuck PTT timer.
•
The PTT activation to a radio stops automatically after 180 s of continuous transmission.
•
The PTT stuck detection can be enabled or disabled by the configuration setup*.
*For more information refer to the software manual "CSW6100... "
www.becker-avionics.com/downloads/
→
Intercom).
Output Level TX-Devices
•
The REU6100 has a variable output level from 0.07…1.5 V/150
Ω
(adjustable with the
configuration software CSW6100).
Input Level TX-Devices
•
The REU6100 has a variable input level from the TX-devices 2.5…20 V/600
Ω balanced.
Input Level RX-Devices
The REU6100 has a variable input level from the RX-devices 2.5…20 V/600
Ω
balanced.
•
All eight receiver channels can be configured to be under VOICE filter control.
•
All eight receiver channels can be configured to be under Marker Mute filter control.
Sidetone
•
The REU6100 can be configured individually on all eight transmitter channels for natural,
artificial and duplex sidetone.
•
The sidetone level can be adjusted in 3 dB steps from 0 …- 15 dB.
Forced Monitoring
•
Forced monitoring of transceivers can be individual enabled and the output level can be
adjusted with the configuration software CSW6100 for all operators with ACU610X.
Audio Muting
The REU6100 can operate with unmuted intercom and transmitter audio during transmit mode.
•
Monitoring of selected transmitter radios and the intercom audio during transmit mode can
be enabled or disabled by the configuration setup* of REU6100 for any operator with
ACU610X.
•
RX-channels are always muted during transmit mode.
