background image

Drive version with angled plug

Caution

The power supply to the connecting cable must be disconnected prior to assembly/disas-

sembly.

Assembling the plug-in connecting cable for tubular drives with angled plug

Ø35/Ø45/Ø58

Plug the 

dead

 connecting cable into the angled plug until the

locating lug clicks into place in the angled plug. If necessary,
use a suitable flathead screwdriver to assist with insertion. Set
the screwdriver into one of the two grooves on the plug-in con-
necting cable provided for this purpose.

Check that the cable is properly engaged.

1 = locating lug

Disassembling the plug-in connecting cable for tubular drives with angled plug

Ø35/Ø45/Ø58

Insert a suitable flathead screwdriver right into the recess of the
locating latch, so that the latch releases the locating lug from
the plug.

Now you can pull out the connecting cable along with the flat-
head screwdriver.

A = locating latch

Assembly

Assembling the drive

Attention

To connect the drive to the driven part, solely mechanical accessory components made by

the drive manufacturer from the current product catalogue may be used.

Prior to mounting, the fitter must ensure that the masonry and the system being motorised are sufficiently robust (drive torque plus
weight of the shading solution).

Caution

Electrical connections may only be carried out by a qualified electrician. Prior to assembly,

the power supply must be disconnected and secured. Please give the enclosed connection

information to the responsible electrical contractor.

Calculate the space required at the side (M) by measuring the drive head (1) and wall bracket (2). The
clear dimension of the box (X) minus the space required at the side (M) and idler (G) gives the length
(L) of the barrel: L=X-M-G.

The space required at the side (M) varies depending on the combination of drive and wall bracket.

6 - en

Summary of Contents for E02

















Reviews: