An arrow indicates the currently active element. If the upper element (MODE) is selected,
you can leave the menu with the "Up" button. The Relight will start automatically. If you
have selected the menu “warning threshold voltage” and press the Down button the Relight
will start. The values are stored in the processor internal EPROM. After separation of the
Relight from the car the information will not be lost.
HINT: If a warning level - for example of 104 volts - is set the Relight warns from 108 volts
on with a beeping sound. The interval will decrease if the battery voltage approaches the
preset threshold of 104 volts. When falling below 104 volts the Relight beeps continuously.
As mentioned above, the threshold 102-111 volts can be adjusted. At 111 volts, the Relight
begins beeping at 115 volts.
TIP: With a high threshold of 115 volts, the red zone of the "econometer” can be avoided by
the acoustic warning. Lower voltage thresholds are suitable for emptying the car’s batteries.
