Known Errors:
If one presses the "down" key in main menu, this should be ignored. Unfortunately, the
ReLight hangs up with the version 1.8. This was corrected with version 1.9
The main function of the ReLight is the water servicing. All functions in connection with
the water servicing were tested. The functionality of all other menu points cannot be
guaranteed.
.
History:
Version 1.6
The first version of the ReLight
With this version there was no possibility to switch between newer and older board
computers. With older vehicles (<1998) the voltage and the current are indicated too high.
Furthermore the overcharge counter showed consistently 160 Ah because the older vehicles
deliver no battery info, as for example the overcharge counter.
Version 1.7
: From this version on it can be switched between mode 0 and 1. Mode 0 is for
older board computers and mode 1 for the newer models. The voltage will now be correct
shown but the current is still too high.
Version 1.8
: Canceling the charge was corrected. If one presses the "Down" key in the main
menu, however, the ReLight crashes.
Version 1.9
: Now in the mode 0 the current is indicated correctly. The problem with the crash
by this pressing the "Down" key in the main menu was corrected.
Version 2.0:
Uses a "bigger" processor, which is 100% compatible with the old processor.
The program memory, however, is twice as large as the "old" processor’s.
The following functions are new:
- Audible alarm with adjustable threshold, monitoring the battery voltage. Helpful for driving
the batteries empty. To change the warning threshold: See page 5
- New feature for deleting errors. After clearing the errors it will be examined, whether all
errors were actually deleted. If there are still errors (permanent error that can not be deleted),
detected this will be indicated.
- The capacity of the battery is no longer shown as LS (load level) but as CAP
(capacity). (See main menu)
