Also the temperature of the distilled water should not be less than 20 degrees centigrade.
The maintenance charge should not be carried out if is to be seen that the procedure must be
broken off right in the middle (e.g., if the vehicle must be moved or be separated from the
outlet).
How to perform the battery maintenance
1.) Park the vehicle on level reason. Do not pocket the charging cable yet
.
2.) Connect the ReLight2010 with the car and choose ”Maintenance charge”. Then press
„Enter“.
3.) If you want to start the maintenance charge press „ENTER“ again (if not, press „up“ or
„Down“). If you press „Enter“ you will see the following:
4.) Press „ENTER“ again. The ReLight restarts.
5.) The ReLight has restarted itself. Remain in the main menu.
Connect the charging cable to the car, do not close the loading charge-flap yet. Put the plug in
the outlet and close the charging flap. All 4 direction indicators shine for some seconds. Go to
the menu maintenance charge. A twiddle sign should stand behind 3 horizontal lines which
shows, that the charge is active. This indicates that charging takes place and the charging
voltage was recognised. If 3 horizontal lines do not appear the loading process should be
cancelled – start again from the beginning. Only if 3 horizontal lines appear, a maintenance
charge is a carried out! Remove the ReLight from the interface.
Warning: In Mode0 the
twiddle sign is not shown. Older car computers are not able to provide this information.
