BeamTec Magnetron MPS 500 User Manual Download Page 7

Page: 7 / 60

MPS-10 Instrukcja obsługi Rev.1.0

BeamTec GmbH

Wolfgang-Paul-Str. 4, 89081 Ulm, Germany

http:

www.beamtec.de

, e-mail: [email protected] tel.: +49 731 146620-0

1.4.3.

ENERAL

AFETY

NSTRUCTIONS

For all work you are going to do, adhere to the applicable safety regulations. Also

observe all safety notes given in this document and forward the information to all other users
of the product. In particular, pay attention to the following safety notes:

Fig 1.0.1 Do not insert objects through louvers and keep device dry

Mains voltage.

Contact with live parts is extremely hazardous when any objects are

introduced or any liquids penetrate into the device.

Make sure that no objects enter through the louvers of the device. Keep the
device dry.

DANGER

Summary of Contents for Magnetron MPS 500





























































Search results

Summary of Contents for Magnetron MPS 500

Reviews:

Related manuals for Magnetron MPS 500

Brands by name

Popular brands

BeamTec Magnetron MPS 500, User Manual

Search results

Summary of Contents for Magnetron MPS 500

Reviews:

Related manuals for Magnetron MPS 500

Brands by name

Popular brands