MPS 500 – User Manual Rev. 2.1
BeamTec GmbH
Wolfgang-Paul-Str. 4, 89081 Ulm, Germany
http:
, e-mail: [email protected] tel.: +49 731 146620-0
14
3.
I
NSTALLATION
3.1.
U
NPACKING
1. Visually inspect the transport packaging for signs of external damage
2. Unpack the MPS500 and put the packaging material aside
Note: Keep the packaging material for later use. The MPS500 must be stored
and transported in the original packaging material only.
3. Examine the MPS500 for completeness
4. Visually inspect the MPS500 for signs of damage
Damaged product.
Putting a damaged product into operation can be extremely dangerous.
Never attempt to put a damaged product into operation. Secure the damaged
product from unintended operation. Send a damage report to the haulage
company or the insurer.
3.2.
M
ECHANICAL
I
NSTALLATION
MPS500 can be used in the following ways: as a bench top device, mounted in
a control panel or mounted in a 19 "rack. In each case, consider the following
important safety information:
The temperature of the environment.
Exceeding the allowable temperature of the device may damage the unit.
DANGER
!
WARNING
!
