BDCOM S6508 Switch Hardware Installation Guide
There is two types about EMI: radiation interference and conduction interference. It is
decided by the style of transmit path.
When the emanant energy of a parts of an apparatus which is radio frequency energy
get to sense organ through interspace, it is intituled radiation interference. The
interference fountain can be a part of system that is beared interrerence, also can be a
cell that is separated completely by electric. The production of conduction interference
that is because there is connection between fountain and sense organ, the
interference is transmitted from one cell to another cell along the cable. The
conduction interference often influence power of equipment, but it is controlled by
rejector. The radiation interference can influence any signal path of equipment, so it is
difficult to screen.
1) Take effective measure which prevent the interference of electrified wire netting for
power supply system.
2) The switch working place should not share with the grounding fitting of electrical
equipment and preventing thunder equipment. It is better that their distance is
farness.
3) The switch should be far away those strong power wireless launch pad, radar
launch pad and high frequency and strong electric current equipment.
4) It must take measure of static screen.
2.3.5 Fiber-Optic Connectors Note
Always make sure that you insert the connector completely into the socket. Use
extreme care when removing or installing connectors so that you do not damage the
connector housing or scratch the end-face surface of the fiber.
2.4 The request of installation tools
Table 2-4 The list of tools and instruments
Tools
Screw-driver, pertinent cable and ray cable, bracket bolt,
electric welding, pincers and broad belt.
Expert tools
Electrostatic-protective wrist strap
Meter
multimeter
S6508 equipment is no saddlebag, so those tools need to be prepared by users.
2.5 Requirement of checking
The equipment is sent according to the compact,the consignee must check the
equipment by opening the package according the compact.
- 29 -
