BDCOM S6508 Switch Hardware Installation Guide
Plug in corresponding connection-peg, and close the back board, and give a
good screw.
5.3.3 power supply maintenance
When there is trouble on power supply, user needs to cut off power connect,and pull
out power supply module after loosening two captive screws on the panel of power
supply module.Then after eligible power supply is replaced, give a good screw and
connect power cable.
5.4 remote maintenance
S6508 supports remote maintenance. Users can log on switch by utilizing telnet
method through internet. If switch have been connected to internet, user can log on
switch by telnet method, execute all commands, and run remote maintenance.
figure 5-1 S6508 remote maintenance
- 55 -
