BDCOM S6508 Switch Hardware Installation Guide
Figure 4-5 startup image
(3) Config ethernet ip address
monitor#
ip address
<
ip_addr
> <
net_mask
>
Patameter explanation:
ip_addr:
IP address
net_mask:
network mask
For example:
monitor#ip address 192.168.1.1 255.255.255.0
(4) Test network by ping command
monitor#
ping <ip_address>
<ip_address>: target ip address,
(5) To install or upgrade system software by tftp protocal, input following command:
monitor#
copy tftp flash [ip_addr]
This command is used to opy file from tftp server to flash media of switch, after
enter command, systerm will prompt user enter right server name and file name.
Parameter explanation:
- 46 -
