19 November 2008
BD X-Monitor 2 #
1080500
31
BD Engine Brake Inc
A10 – 33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Ship: #88 – 446 Harrison St, Sumas, WA 98295 Mail: PO Box 231, Sumas, WA 98295
Ph: 604.853.6096 Fax: 604.853.8749 Internet: www.bd-power.com
conditions. Selecting values that will be reached on a normal basis will affect drivability as
the truck will constantly be defueling. If you are drag racing it is recommended to turn the
defuel settings to OFF. The defuel settings will be functional even if you choose not to
view the parameter.
Example: If you choose a 1 function display for EGT, but you want to defuel based on
boost, the X2 will display EGT at all times, but it will defuel the engine when the boost
level reaches your set maximum. The X2 will return the full amount of power that you
have selected once the parameter that was exceeded is back within a normal operation
range.
Warnings
Once you enter the warnings menu, you will be able to set a visible warning to any
monitored parameter. You do not have to be viewing the parameter in order for it to give
a warning. You may set as many warnings as you desire. Once again, it is recommended
to keep your warnings practical as constant warnings flashing on your screen may
become undesirable. The X2 has the ability ti display as many as 4 different warnings at
one time.
If one warning is reached, then the X2 will switch to a 1 function display, and display the
parameter that has reached the maximum. If two warnings are reached, the X2 will show
the 2 function display with a warning on each side. The 3 and 4 function screens will
appear if 3 or 4 warnings are reached. The X2 will continue to display the warnings until
the parameters fall back below your set maximum, or you can reset the warnings.
Once again, it is not necessary to view any of the parameters that you choose to set
warnings for. The warnings are meant for parameters that you choose not to watch and
that you want the X2 to watch for you. This gives you the ability to view only those
parameters that you desire to see all the time.
Setup
This menu allows you to select your particular vehicle, choose a power module or chip to
control, turn sensors on and off, set
warm-up mode, calibrate your EGT
gauge, or retrieve version and serial
numbers.
The setup menu is as follows:
Vehicle Setup
This menu allows you to choose what
vehicle you are installing the X2 in. If you
choose to move it to another vehicle, you
