4.
Hold pebble ‘B’ upright with
the arrow pointing to the top.
Place pebble “B” on top of the
front base pebble. The pebble
should sit in the recess on top of
the front base pebble (See
figure 46).
6.
Hold pebble ‘C’ upright
with the arrow pointing to
the top. Place pebble “C”
between the front and rear
base pebbles. It should lie
against the side of the
firebox and bridge the gap
between the front and rear
base pebbles (See figure 47).
7.
Hold pebble ‘D’ upright with
the arrow pointing to the top.
Place pebble “D” between the
front and rear base pebbles. It
should bridge the gap between
the front and rear base
pebbles (See figure 48).
8.
Hold pebble ‘E’ upright
with the arrow pointing to
the top. Place pebble ‘E’
between the front and rear
base pebbles. It should
bridge the gap between the front
and rear base pebbles (See
figure 49).
9.
Hold pebble ‘F’ upright with
the arrow pointing to the top.
Place pebble ‘F’ between the
front and rear base pebbles. It
should bridge the gap between the front and rear base pebbles (See figure 50).
Page 31
INSTALLER GUIDE
Figure 50.
Figure 49
.
Figure 48.
Figure 47.
Figure 46
