2.
Install the fourteen loose overlay ceramic
coals as follows. The smooth surfaces of the
ceramic coals should be at the bottom and
back. Place five of the ceramic coals along
the top of the front base coal (See figure 25).
The ceramic coals should be evenly spaced.
Each ceramic coal can be rotated to give a
random effect. Placing the ceramic coals with
flat sides facing forward will give a very
uniform appearance.
Important : The front ceramic coals should
not cover the opening slots in the base
ceramic coal. If the opening slots in the
base ceramic coal are covered by more
than 2 -3 millimetres a poor flame picture
will result (See figure 26).
A gap is required between the outer left
hand ceramic coal and the ceramic coal to
its right. This is for pilot viewing.
3.
Place five loose ceramic coals on top of
the first row of ceramic coals. These should
be evenly spaced. Rest them on the ledges
above the slots in the base coal (See figure
27).
Page 25
INSTALLER GUIDE
Figure 27. Second row of ceramic
coals
Figure 25. First row of ceramic coals
Figure 26. Ceramic coal positions
