4.
Place the remaining four ceramic coals on
top of the base ceramic coal rear (See figure
28).
11.2 Ceramic coal fuel effect installation for the Quantum model.
The ceramic fuel effect may cause staining /
discolouration to decorative surfaces. It is
therefore advisable to protect decorative
surfaces.
1.
Place the rear base coal in the firebox. It
should rest on the ledges at the rear sides of the
burner unit. When located gently move the rear
base coal so that it is as far forward as
possible. The amount of movement will
be negligible (See figure 29).
2.
Place the front base coal in the firebox
with its bottom front locating over the
front rim of the firebox. Pull the coal
forward so that it locates immediately
behind the front rim of the firebox (See
figure 30). The front base coal will touch
the rear base coal as it is located.
There are two types of loose coals. These
are identified with the letter “A” or “B”
on the underside of the coal.
There are three “A” coals and two “B”
coals.
Page 26
INSTALLER GUIDE
Figure 28. Third row of ceramic
coals
Figure 30. Front base coal position
Figure 29. Rear Base Coal Position
