FITTING THE HEATER
The installation of this heater requires a reasonable level of DIY skills.
Please read this guide thoroughly before commencing installation and if in doubt,
seek help from a competent person
Do I need any tools?
1.
Depending upon the chosen method of installation you may need the following
screwdrivers: -
!
1 off Pozidrive / Phillips / cross head
. This should have a number 2 size tip.
!
1 off Flat end.
2.
If drilling into brickwork you will need a power drill (preferably with hammer action)
and appropriate size drill bit for the wallplugs supplied.
Where can I fit the heater?
There should be at least 50mm (2 inches) clearance between the top of the fascia and
anything such as a shelf, fireplace surround or mantel etc. This will allow the fascia to
be lifted off or removed during servicing. To check this gently place the fascia against
the surface to which it is to be fixed. Measure the distance from the top of the fascia.
Chic, Envy, Mirage and Serenity models.
The heater can be fitted into fireplaces or surrounds where the following dimensions are
available.
Width
390mm - 450 mm (15.35 inches - 17.72 inches)
Height
555mm - 590 mm (21.9 inches - 23.2 inches)
Depth
At least 75mm (At least 3 inches)
The heater can also be fitted against against a flat wall. A spacer frame is supplied with
the heater.
Twilight model.
The heater
cannot
be fitted into fireplaces / fireplace openings. It is intended for
installation to a flat wall. A spacer frame is supplied with the heater.
Important Electrical Safety
The heater must
not
be located in front of or under an electrical socket, the socket must
always be accessible in order to disconnect the heater from the electrical supply for
maintenance and cleaning.
Important! This heater must be earthed.
Page 5
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2005.
