If the electric cable is damaged, to avoid a
hazard it must be replaced by a Baxi Fires
Division authorised service agent, or
similarly qualified person (See page 16) All
external wiring between the heater and the
electrical supply shall comply with current
IEE regulations.
Fascia support brackets.
As supplied the fascia support brackets may
be flat against the heater body. Using a
suitable tool or gloved hand bend the
brackets as in figure 2.
Heater Fixing.
All of the fixings and loose parts supplied with the heater have been identified as in
figure 3.
Additional fixings may be required if fitting the heater to a plasterboard wall that has a
wooden frame behind it. In such cases we recommend the use of heavy duty cavity
fixings. If fitting the heater in an elevated position (i.e. above hearth or finished floor
height) then the lower support bracket must be fitted (See figure 3).
Page 7
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2005.
Figure 2. Fascia support brackets
Figure 3. Loose parts identification (Items are not to scale)
