Baxi Fires Division MIRAGE 804 Installer And Owner Manual Download Page 3

Page: 3 / 16

Safety First.

Baxi Fires Division heaters are CE Approved and designed to meet the appropriate

British Standards and Safety Marks.

Quality and Excellence.

All Baxi Fires Division heaters are manufactured to the highest standards of quality and

excellence and are manufactured under a BS EN ISO 9001 quality system accepted by

the British Standards Institute.

HANDLING AND UNPACKING

Before continuing any further with the installation of this heater please read the
following:

Important instructions.

The lifting weight of the heater is as below:

Model

Heater Body (kg) Fascia (kg)

Spacer (kg)

Total (kg)

Chic

5.3 kg.

3 kg.

0.9 kg.

9.2kg.

Serenity

5.3 kg.

6.5 kg.

1.3 kg.

13.1 kg.

Twilight

5.3 kg.

8.0 kg.

0.9 kg.

14.2kg.

Envy

5.3 kg.

3.11 kg.

0.9 kg.

9.31kg.

Mirage

5.3 kg.

3.60 kg.

0.66 kg.

9.56kg.

Page 3

INSTALLER AND OWNER GUIDE

Baxi Heating U.K. Limited 2005.

Summary of Contents for MIRAGE 804

















Search results

Summary of Contents for MIRAGE 804

Reviews:

Related manuals for MIRAGE 804

Brands by name

Popular brands

Baxi Fires Division MIRAGE 804, Installer And Owner Manual

Search results

Summary of Contents for MIRAGE 804

Reviews:

Related manuals for MIRAGE 804

Brands by name

Popular brands