5. FIREPLACE CHECK
5.1 Fireplace check.
5.1.1
Fireplace size
The fireplace must comply
with the requirements
described in section 3.2.
This will probably entail
removing the fireback and
infill material behind the
fireback. The debris
catchment area shown in
figure 7 must be kept clear
of obstructions.
5.1.2
Fireplace general
condition
The fireplace floor should
be reasonably flat to ensure
that the hotbox can be
installed without it rocking and so that a good seal can be made at the bottom front of
the box. The front face of the fireplace should be reasonably flat over the area covered
by the hotbox top and side flange seals to ensure good sealing. These faces should be
Page 19
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2007.
Figure 7. Fireplace area.
Figure 6. Pack contents continued.
