Baur PD-TaD 80, User Manual, Page: 21 / 74

PD-TaD 80 Product information
822-188-3 21 / 74
No. Element Function
1 Protective earthing port
(metal port) Is used to connect the protective earthing
2 Signal output (black port) Is used for connection to the test object.
3 Display of selected charge in
[nC]
4 Range Is used for setting the calibration charge
Possible settings:

CAL1B: 0.10, 0.20, 0.50, 1.00, 2.00, 5.00, 10.00 nC

CAL1E: 0.50, 1.00, 2.00, 5.00, 10.00, 20.00, 50.00 nC
5 Pos/Neg

Press briefly to set the polarity of the signal.
On/Off

To switch on, press briefly.

To switch off, press for approx. 3 seconds.

Note that the calibrator must be removed from the test circuit before switching on the
high voltage source.
Note: After some time, the calibrator automatically switches off to extend the battery life. If
you have not yet completed the calibration, switch on the calibrator.