Baur PD-TaD 80 User Manual Download Page 18

Page: 18 / 74

Product information

PD-TaD 80

18 / 74

822-188-3

3.4

Power Box (PD-TaD 80 as a standalone system)

The Power Box acts as the power supply for all system components:



PD-TaD 80



VLF HV generator



Laptop

No.

Element

Function

Mains voltage
connection

Is used to connect the Power Box to the mains voltage

When the mains voltage is connected, the LED next to the mains voltage
connection lights up.

Device protection fuse

Used to protect the Power Box and connected system components

Type: T 16 AH

Laptop

port

Is used to connect the laptop

The laptop is used for data transmission and is connected to the Power Box
via the Ethernet cable (included in the standard delivery).

PD Detector

port

Is used to connect the PD measuring unit of the PD-TaD 80

The PD measurement unit is connected to the Power Box via a PoE cable.
The PoE cable is used for the power supply of the PD-TaD 80 and for data
transmission.

Ports for system power
supply

Are used to connect the VLF HV generator and the laptop to the power
supply on the Power Box

Max. current 16 A

Summary of Contents for PD-TaD 80











































































Search results

Summary of Contents for PD-TaD 80

Reviews:

Baur PD-TaD 80, User Manual, Page: 18 / 74

Search results

Summary of Contents for PD-TaD 80

Reviews: